Sanding Wooden Floor And Floor Sanding Tips

Sanding wooden floors involves a fair amount of precision. Given below are some floor sanding tips:

1.At the outset, care should be taken to remove as little wood as possible during the sanding process. Excess sanding shortens the life of the wooden floor and greatly increases the work that needs to be done.Floor sanding in London in many cases is done on very antique flooring, and over sanding ruin these floors.

2.It is advisable to start sanding wooden floors with a fine or medium grit. If this will serve the purpose of removing the old finish and leveling the floor, more abrasive sanding can be avoided.

3.Remember that cupping, crowning and unevenness could result from moisture. Ensure that there is no presence of moisture before starting work.

4.One of the most important floor sanding tips is to check the thickness of the floor before sanding. This will prevent over sanding.
5.Excessive scratches, holes and exposed nails could be marked by a pencil which will indicate areas for special treatment.

6.A coarse abrasive may have to be used if for some reason wood is scratched badly, thus necessitating sanding to new wood. Remember to always try a medium abrasive paper first.